HUGH'S TECH TIPS &
SERVICES
- Engine- Polish cases, inner and outer & paint logo - $175.00
(if engine & cases need old paint
removed, add $130.00) -
Crank rebuild- Install new rod and bearing and align to 0.001 -
$85.00
-
Bore Cylinder- Bore and hone cylinder to proper piston clearance
and chamfer ports - $85.00
 |
Rethread Exhaust- Rethread
stripped
exhaust threads in round cylinder.
$85.00 |
Steel
Lined Brake Hubs $245.00
For those of you who have peeling chromed
brake hubs,
here is your solution! Send your complete wheel or hub
to have it bored and a steel liner installed.
-
Line Bore Cases- Line bore worn-out crank bearing areas, re-sleeve
cases to fit bearings. A must for all 360's & 370's - $250.00
-
Liner Installation- Remove old liner, install new one and bore to
standard. Face top and bottom as necessary - $200.00
-
Change Shift Right to Left, weld boss in cases for seal, line bore
for long shift shaft - $225.00
-
Total engine rebuild (labor only, parts additional) - $450.00
-
Boring and crank work - An additional $85.00 each
-
Frame, sandblast and paint frame - $300.00
-
Shock rebuild- Disassemble, clean, reseal, paint, and re-oil - $90.00
plus parts
-
Forks rebuild- Disassemble, clean, reseal, new oil - $90.00 plus
parts. Polish - $75.00 pair
-
Assemble wheel and align - $120.00
-
Polish before assembly - $75.00
-
All other labor $75.00 per hour
|
