P/N 29-15-118 CARB TOP RUBBER $12.75
Used on 1000 series Amal concentric carbs
Click To Buy Online

P/N 107-15-210 THROTTLE RUBBER $13.95
Used on large aluminum Amal throttle. Fits
on some Pursang & Matadors
Click To Buy Online

  P/N 142-15-166 FILTER HOSE $31.78
Fits Metralla GT & GTS models.
  Carb side of hose measures 58mm inside diameter.
Click To Buy Online
 

P/N 155-15-166 FILTER HOSE $27.02
Used on 2600 & 2900 series square body
Amal carbs. Fits on 1976 and later 250cc
Alpina & Sherpa T models. Carb side of
hose measures 52mm
Click To Buy Online
 

P/N 144-15-166 FILTER HOSE $32.95
Used with Bing 32-36mm, round body Amal
30-36mm & Mikuni from 30-34mm. Carb side
of hose measures 52mm in inside diameter.
Click To Buy Online 
 

P/N 166-15-166 FILTER HOSE $28.01
Used on 1976-1978 350 ALPINAS
Click To Buy Online

P/N 10-15-166 FILTER HOSE $29.95
This filter hose is used on Matador MK2,
Sherpa T up to 1975, 1972-1975 Alpina
(only used on 1975 with round Amal carb)
This hose may need to be trimmed for some
models.
Click To Buy Online
 

P/N 137-15-066 CARB SPACER $13.96
Used on 28mm Bing & 2900 Series square
body Amals.  Inner dimensions are: 39mm
Click To Buy Online


 

P/N 144-15-066 CARB SPACER $14.25
Used on 36-40mm 2000 series square
body Amal & 36mm Bing Carbs. Inner
dimensions are: 46mm
Click To Buy Online

P/N Mikuni Rubber Carb Spacer $13.96
Used on the 26-28mm round slide carb.
Also used on the 28mm flat slide. 
34X39mm diameter 
Click To Buy Online       

P/N 26-01-020 & P/N 26-15-048 BULTACO GRIPS
$18.00 A SET.  
Originally fitted to most Bultacos
 Click To Buy Online
                            

P/N 42-01-044 STEERING STOP $9.00 A SET.
Used on some Astros, Pursang MK2,3,4,&5,
Bandido & Montaderos.  
                              Click To Buy Online                                  



P/N 100-137 FOOT PEG RUBBERS $16.00 A SET
Used on Metrallas, Mercurios, & Astros    
with round pegs. 
Click To Buy Online  

P/N 26-00-072 BLACK PLATE HOLDER $19.95
Black license plate holder used on some early
Matador & Alpina models.    
                              Click To Buy Online                                  

           


P/N 48-00-140 IGNITION GROMMET $4.97
Used in case where ignition wires come out.
Click To Buy Online

P/N 137-21-184 IGNITION BOOT $5.72
Used with Femsa ignitions with a 3 spade
flat connector.  
Click To Buy Online 

P/N 113-016 SHIFT RUBBER $4.51
Fits shift levers with flat style foot pad. 
Click To Buy Online

P/N 28-16-031 GUIDE RUBBER $13.38
Used on early Alpina & Sherpa T to 1973,
 Tiron, Lobito, Campera, & Sherpa S 100
Click To Buy Online
 

 
P/N 120-16-014 CHAIN GUIDE RUBBER $14.75
Fits on "74" & newer Pursangs and all
Frontera models.
Click To Buy Online
 

P/N 219-16-031 GUIDE $15.32
Used on top of swing arm for 1979
MK12 Pursangs
Click To Buy Online

P/N 206-16-031-1 CHAIN GUIDE RUBBER $16.95
This chain guide rubber was original on the 1978
Pursang & Frontera models. This rubber can be used
on many other model to protect the swing arm from
the chain. 
Click To Buy Online
 

P/N 18-03-083 SWING ARM RUBBER BUSHING $11.90 A SET
These swing arm rubber bushings are used on
El Bandido and Montadero models. 
Click To Buy Online

P/N 23-12-033 KICK RUBBER $6.05
Used on all model Bultacos
Click To Buy Online
 

P/N 206-03-100 SUPPORT $25.50 A SET
Used on 1978-1979 Pursangs & Frontera
            with remote reservoir type shocks.            
            Click To Buy Online  

 

P/N 122-02-022 HEADLIGHT
SUPPORT $30.00 A SET
Used on 1975 Frontera models and 75-77
Sherpa T's that were fitted with light kits.
Click To Buy Online



P/N 100-02-017 DUST COVERS $22.00 SET
Used on many model Bultacos with 35mm Forks
Click To Buy Online



P/N 11-02-017 DUST COVERS $22.00 A SET
Used on many model Bultacos with 35mm Forks
Click To Buy Online
 

P/N 102-003 RUBBER GASKET $4.68 A SET
Used on street models between head light
bracket top triple clamp.
Click To Buy Online

P/N 107-04-029 HUB PROTECTOR $7.99
Used on many models from 1973 & onward.
Click To Buy Online

 

P/N 421-057 TAIL LIGHT RUBBER $6.75
Used on the bullet shaped Gemo brand
tail lights. Fits on some Alpinas, Sherpa T's &
Matadors.
                  Click To Buy Online                        

P/N 111-038 PLUG GASKET  $1.55
Used for all transmission fill plugs &
Some clutch fill plugs.
Click To Buy Online

 

P/N 68-17-051 SILENT BLOC $3.88
Used On Low Pipe Models,
Click To Buy Online
 

P/N 18-00-070 RUBBER WASHER  $2.44
Sealing rubber used between petcock and gas tank.
Click To Buy Online

 

    P/N 800-037 TANK REST $11.50 A SET
    Used on some older models. Fits in the
    side of frame
   Click To Buy Online

P/N 199-00-084 TANK RUBBER $8.00 A SET
Tank mount rubber used on 78 and newer
Sherpa T models with plastic gas tanks.
Click To Buy Online
 

P/N 23-00-089 RUBBER $7.01
Used on 203 Metralla at rear of tank.
Click To Buy Online
 

P/N 300-082 TANK REST $3.50
Goes on stud behind triple clamp
to mount tank. 
                              Click To Buy online                                

P/N 159-00-089 WASHER $2.85
Rubber grommet to mount tank on 76-77 Sherpa T's where
bolt went from right to left through tank and frame.
Click To Buy Online
 

P/N 199-15-208B AIR BOX DOOR & RUBBER VENTS $52.75
This kit fits 1981-82 B model Sherpa T's.
Click To Buy Online
 

P/N 300-089 WASHER $2.34
This is used at the top of the gas tank on the front
hold down stud on most models.
Click To Buy Online

P/N 23-16-014 CHAIN GUARD  RUBBERS
$100.04 SOLD ONLY AS A SET
These chain guard rubbers fit a Metralla.
Click To Buy Online

P/N 776-001 TOOL BOX STRAP $9.95
This strap is used for the Frontera toolbox
and a battery strap for the late Metralla
Click To Buy Online
 

P/N 49-15-118 CARB TOP RUBBER $12.75
    Used on 600 series Amal concentric carbs
        Click To Buy Online

   P/N 124-15-210  THROTTLE RUBBER $13.95
   Used on small chrome Amal throttle. Fits
   on some Alpinas & Sherpa Ts
     Click To Buy Online


   P/N 137-15-166 FILTER HOSE $30.58
   Used on later 1975 Alpina 250-350 with
   square body Amal carb.
      Click To Buy Online

   P/N 143-15-166 FILTER HOSE $29.36      
Used with square body Amal carb 36-40mm.
Mikuni carbs 36-38mm. Also fits some Lectron
Carbs. Carb side of hose measures 60mm inside
diameter . 
Click To Buy Online



    P/N 159-15-166 FILTER HOSE $29.95
   Used On 28mm Bing Carbs. Fits on Sherpa T 
  350cc From 1976 onward. Carb Side Of Hose
  Measures 47mm. 
                       Click To Buy Online                            

     P/N RB-3 CARB SPACER $14.25                 
    Used when fitting most 30-38mm Mikuni       
   Carbs to Bultacos with a spigot manifold.       
   Inner dimensions are: 41mm- 46mm   
                    Click To Buy Online                     

 

    P/N 156-15-066 CARB SPACER $13.96     
    Used on 2600 Series square body Amal        
   Carbs. Fits on Sherpa T & Alpina models         
   1976 and onward. Inner dimensions are:
   34mm.
Click To Buy Online
                                            

P/N 41-15-066 CARB SPACER $11.20
This carb spacer fits a 30mm & 32mm Amal
carb. The stud pattern measures 51mm
center to center.
Click To Buy Online

P/N 29-15-066 CARB SPACER $11.20
This carb spacer fits a 36mm Amal carb
The stud pattern measures 65mm center to center.
Click To Buy Online

P/N 49-15-066 CARB SPACER $11.20
This carb spacer fits a 27mm Amal carb.
The stud pattern measures 51mm center
to center.
Click To Buy Online

P/N 62-15-066 CARB SPACER $11.20
This carb spacer fits a 25mm Amal carb.
The stud pattern measures 51mm center
to center.
Click To Buy Online

  P/N 49-00-395 STEERING STEM PLUG  $7.71
  Originally fitted to most Bultacos.  
                  Click To Buy Online                   



  P/N 10-00-072  WHITE PLATE HOLDER
    $19.95 White license plate holder. Used
    on early Sherpa T models.
       Click To Buy Online


P/N 23-00-137 FOOT PEG RUBBERS $18.00 A SET
Used on older models that used a flat peg with the
 little dimples on them.
   Click To Buy Online

       P/N 49-00-255 MUD FLAP $19.95
      Used on rear of front fender. Fits on some Alpinas,
Matadors, & Sherpa T's 
          Click To Buy Online

   P/N 107-00-140 IGNITION GROMMET
  $5.75 Used in case where ignition
  wires come out.
     Click To Buy Online

P/N 107-06-042 LEVER COVERS $13.80 PR
Used on many models.
Click To Buy Online


P/N 75-13-016  SHIFT RUBBER $5.26
Used on models with round shift lever tips.
    Click To Buy Online

 

     P/N 108-16-041 CHAIN GUIDE RUBBER
     $14.75 Used on all 1974 and newer
     models with a chain tensioner.
       Click To Buy Online

P/N 219-16-041 CHAIN ROLLER $16.84.
This chain roller is universal that can
be fitted to the Bultaco chain tensioner
Click To Buy Online 

P/N 199-16-031 GUIDE $15.51
    Used on top of swing arm on
1978-1982 Sherpa T Models
  Click To Buy Online



P/N 199-16-014 CHAIN GUIDE $15.05
Used on lower frame at back of skid plate.
Fits 1978-1982 Sherpa T models
Click To Buy Online

              P/N'S 42-03-083 & 42-03-084 SWING ARM SEALS $10.00
              Used on many models up to 1976.
            Click To Buy Online

        P/N 116-02-002 HEADLIGHT SUPPORT $30.00 A SET
       Used on 1974-1975 Alpinas with
       Lucas headlights.
    Click To Buy Online

P/N 140-02-002 HEADLIGHT SUPPORT $35.00 A SET
Used on 76-78 Alpinas and 75 Matador
Click To Buy Online
 
 

     P/N 167-02-017 38mm DUST GUARDS $26.20 A SET
      Fits 1976 250cc & 370cc Pursang plus
     1977 370cc Fronteras With 38mm Forks
      Click To Buy Online

     P/N 26-05-036 RUBBER CUSHION $26.22
     Used on some Metrallas & Matadors
      Click To Buy Online

 

      P/N 721-057 TAIL LIGHT RUBBER $7.68
      Used on rectangular tail lights marked
      Yorka.
        Click To Buy Online

       P/N 116-21-041 TAIL LIGHT & PLATE HOLDER  $19.95
       Used on some Alpinas & Fronteras
         Click To Buy Online

 

     P/N 116-10-118  ANTI VIBRATORS
    $4.61 EACH IN SETS OF 8  $36.88.
    These came stock on 1974 & later Bultaco.
    Can be used on any square barrel cylinder
           Click To Buy Online

    P/N 137-18-044  SPEED-O SUPPORT $22.80
Used On Alpinas From 1975 On &    
    Some Fronteras & Matadors.
    Click To Buy Online
 

P/N 112-13-033 PROTECTOR $4.64
Used on models with the shift shaft  coming
out both sides. This covers the splines on
the side not being used.
      Click To Buy Online

P/N 800-071 TANK REST $7.50 A SET            
Used on the newer models. Fits in the          
side of the frame.     
Click To Buy Online 

P/N 800-081 TANK REST $8.76 A SET
Fits on side of frame and tank slides into rubber
on Metralla MKI & MKII.
Click To Buy Online 



P/N 600-081 TANK REST & SIDE STAND STOP $6.93
Used on all TSS models for mounting the fuel tanks. Also
used on  Campera model 21 and Matador MK1 & MK2 models
for the side stand stop.
Click To Buy Online



 

P/N PETCOCK RUBBER $5.17
This is used on the early style petcocks marked on the back
MOD G-1. The diameter is 25mm & the thickness is 3mm. 
Click To Buy Online
 

P/N 100-089 RUBBER WASHER $1.01
Used to mount tank on earlier models or great for side panels
with 8mm flat head panel screws
Click To Buy Online
 

P/N 179-00-089 WASHER $2.06
Rubber grommet to mount tank. Fits on outside of
tank on Streakers.
Click To Buy Online

P/N 23-17-008 EXHAUST COUPLING $18.75
Inner dimensions are 45mm X 49mm. The overall
is 99mm. This rubber is used to couple the header pipe and
mid muffler on some Sherpa T, Alpina, Tiron, Lobito,
Campera, & Matador models.
Click To Buy Online
 

P/N 26-16-014 CHAIN GUARD RUBBERS
$100.04 SOLD ONLY AS A SET
These chain guard rubbers fit a Matador.
Click To Buy Online

P/N 85-00-229 RUBBER GROMMETS $11.00 set of (4)
This grommet is used for fenders on 1972 -1977
Alpinas. 1973-1974 Sherpa Ts. 
Click To Buy Online

P/N 82-16-040 CHAIN LUBE PLUG $5.75
This plug of used on late model MK ll Metralla &
Matador for access of lubing the chain.
Click To Buy Online